CONTACT

Call: +971 5 448 448 58
Fax: +971 4 355 8090
E-mailThis email address is being protected from spambots. You need JavaScript enabled to view it.

Call: +971 5 448 448 58
Fax: +971 4 355 8090
E-mailThis email address is being protected from spambots. You need JavaScript enabled to view it.

Fibershield-E - Integrity

Fibershield-E Integrity



The economical textile fire protection closure with the highest level of standardisation


Protection targets


Integrity Schutzziel E - Protection target
Classifikation

E 90

Fabric

Ecotex 1100-B1
Ecotex 1100-A2

Test reports

UB III/B-06-005
3102/717/07
UB 3.1/09-021
UL 10D

 



Description of the Fibershield-E system


  • high level of standardisation which leads to an economic sealing system with a maximum width of up to 6 m and a drop length of up to 8 m or a width up to 7 m and a drop length of up to 5 m.
  • drive system “Gravigen” as a standard - closing without auxiliary power, no fire-rated cables necessary
  • high number of cycles of the motors of 10.000 cycles
  • different protection targets E, EW, EI (with water) by using different types of fabrics
  • side guides with buttons
  • large fire protection closures of min. class C 1 according to DIN EN 13501-2
  • optional with safety edge
  • optional with self-levelling bottom bar
System width Drop length

Fabric System width Drop length
(mm)
h
(mm)
Ecotex 1100 > 1,1 m < 6 m ≤ 8 m 200 220
Ecotex 1100 > 1,1 m < 7 m ≤ 5 m 200 220


Range of casings



Installation to the ceiling   Installation to the wall   With self-levelling bottom bar
Installation to the ceiling   Installation to the wall   With self-levelling bottom bar



Bottom bar



Standard design Self-levelling bottom bar



Installation of side guides


   
Type 80 K   Type 80 KB   Type 80 KN



Range of installations


     
Installation of the casing to the wall, front site run   Installation of the casing to the wall, false ceiling is attached to the casing on one side, front site run   Installation of the casing directly to the ceiling   Installation of the casing directly to the ceiling, false ceiling is attached to the casing on both sides

Installation of the casing to the ceiling by using hangers Installation of the casing to the ceiling by using hangers, 
false ceiling is attached to the casing on both sides

Control units for fire protection closures

Control units for single closures:

Control units for multiple closures: