Fibershield-W Integrity
Fibershield-W Integrity |
The textile fire protection closure for openings in façades, installation inside a building or for small openings
![]() |
Protection target
Integrity |
![]() |
|
Classifikation | E 120 |
|
Fabric | Ecotex 1100-B1 |
|
Test report | UB III/B-06-016 |
Description of the Fibershield-W system
- Widths up to 4 m with smaller drop lengths, otherwise up to 1,5 m square (see table)
- textile fire protection closure for window openings
- cost saving solution by manual re-opening, optional a motorized drive is possible
- standard operable windows can be used. Metal windows require for the "Ecotex" fabric, wooden and plastic windows require for the "Heliotex" fabric
- soft bottom bar to match the safety demands concerning the industrial safety
- thermo mecanical release, optional release by fire detection elements
- by prevention of a flame flashover over the balustrade, the drop length is limited to max. 1 m
- standard drive by a hand wheel or a hexagon nut, optional a crank handle may be used
![]() |
![]() |
![]() |
![]() |
Fabric |
System width | Drop length | t (mm) |
h (mm) |
Ecotex 1100-A2 / B1 |
< 0,5 m | < 0,5 m | 135 | 140 |
Ecotex 1100-A2 / B1 | < 1,5 m | < 2,0 m | 135 |
140 |
Ecotex 1100-A2 / B1 | < 1,8 m | < 1,8 m | 135 |
140 |
Ecotex 1100-A2 / B1 | < 2,3 m | < 1,0 m | 135 |
140 |
Ecotex 1100-A2 / B1 | < 4,0 m | ≤ 1,0 m | 135 |
140 |
Casing
![]() |
![]() |
![]() |
Thermomechanical (Standard) |
![]() |
Electromechanical (Special) |
Bottom bar
![]() |
Side guide
![]() |
Control units for fire protection closures
Control units for single closures:
- without hold-open time in case of power failure
- with up to 10 min hold-open time in case of power failure
- with over 10 min hold-open time in case of power failure
Control units for multiple closures: