CONTACT

Call: +971 5 448 448 58
Fax: +971 4 355 8090
E-mailThis email address is being protected from spambots. You need JavaScript enabled to view it.

Call: +971 5 448 448 58
Fax: +971 4 355 8090
E-mailThis email address is being protected from spambots. You need JavaScript enabled to view it.

Type Fiberseal-S200

Fiberseal-S200



The tight smoke protection closure with the classification S200
for high pressures and a smoke temperature of 200 °C




Characteristics of the Fiberseal Evoultion-S200


  • tested according to DIN EN 1643-3 resp. DIN 18095-3 with classification according to DIN EN 13501-2 of class S200 – max. leakage of 50m³/h of the complete system up to 200°C and at 50 Pa – and fire resistance test according to DIN EN 1634-1
  • max. approved dimensions according to the AbP 7 m x 4,5 m
  • technically feasible are dimensions of 10 m x 6 m (for demand EW90 10 m x 5 m)
  • cycle test according to class C2 = 10.000 cycles
  • elastic floor sealing to seal bigger unevenesses (eg to 30 mm within 1 m)
  • versatile mounting options
  • passive sealing system for closing, so that no compressors and wear parts are necessary. By this also the possibility of using it as a fire protection closure is given, as no sealing parts are combustible
  • additional protection targets through special fabrics for fire resistance classes of E 120 and also up to EW 90
  • high quality fabric with silicone coating, optionally with PU coating
  • patented tubular motor drive system with Gravigen technology
  • integrated safety edge as an option

 


Fabric System width Drop length t
(mm)
h
(mm)
Fabric
Protex 600 S / Ecotex 1100 2S < 10 m ≤ 6 m 350
260 Standard
Protex 600 S / Ecotex 1100 2S < 5 m ≤ 4,5 m 285
200 Special
Protex 600 S / Ecotex 1100 2S < 3,5 m ≤ 3,5 m 190
290
Special
Protex 600 S / Ecotex 1100 2S < 7 m ≤ 5 m 290 360 Special
Heliotex < 7 m ≤ 3,5 m 350
260 Standard
Heliotex < 5 m ≤ 2,5 m 285
200 Special
Heliotex < 3,5 m ≤ 2 m 190
290
Special
Heliotex < 6 m ≤ 3 m 290
360 Special

Casing 285 x 200 only for ceiling mounting

Standard casing        Special casing



Choice of casings


Standard casing   Special casing  
Standard casing   Special casing  



Bottom bars


       
Standard   With safety edge      



Installation of the side guides


Installation to the wall   Installation in the embrasure   Installation in the niche
Installation to the wall   Installation in the embrasure   Installation in the niche



Installation options


Installation of the casing to the wall   Installation of the casing to the wall; false ceiling is unilaterally connected to the casing   Installation of the casing directly to the ceiling
Installation of the casing to the wall   Installation of the casing to the wall; false ceiling is unilaterally connected to the casing   Installation of the casing directly to the ceiling

Installation of the casing directly to the ceiling, false ceiling is connected to the casing on both sides   Installation of the casing over a suspension to the ceiling   Installation of the casing over a suspension to the ceiling  false ceiling is connected to the casing on both sides, without fire protection
Installation of the casing directly to the ceiling, false ceiling is connected to the casing on both sides   Installation of the casing over a suspension to the ceiling   Installation of the casing over a suspension to the ceiling false ceiling is connected to the casing on both sides, without fire protection



Protection targets


Smoke protection closure tested according to DIN EN 1634-1/3, classified according to DIN EN 13501-2 

Protection target No requirements for fire protection Requirement up to E 120
(integrity)
Requirement up to EW 90
(limitation of heat transmission)
Requirement up to EI 120
(characteristic: Insulation/with water)
S200 tested according to 
DIN EN 1634-3
 
integrity
radiation protection
characteristic: heat insulation/with water
 Max. dimensions according to AbP / limitated by the standard 
(w x h)

7 m x 4,5 m

max 31,5 m²

 

Max. dimensions according to AbP / limitated by the standard 
(w x h)
7 m x 4,5 m
max 29,4 m²
Max. dimensions according to AbP / limitated by the standard 
(w x h)
7 m x 4,5 m
max 29,4 m²
Max. dimensions according to AbP / limitated by the standard 
(w x h)
7 m x 4,5 m
max 29,4 m²
Technically feasible per side 10 m x 6 m Technically feasible per side 10 m x 6 m * Technically feasible per side 10 m x 5 m * Technically feasible per side 10 m x 6 m *
Fabric Protex 600 S Fabric Ecotex 
1100 2S
Fabric EW 30
Fabric EW 90
Ecotex 1100 2S
Heliotex
Fabric Ecotex 
1100 2S
Certificate AbP: P-3359/
128/08
MPA Braun-
schweig
Certificate Test reports: P-3286-
0926
MPA Braun-
schweig,
UB III/B-06-15 (E 120)
Certificate Test reports:
P-3286-0926
MPA Braunschweig,
UB III/B-08-012 (EW 90)
UB III/B-06-15 (EW 30)
Certificate Test reports:
P-3286-
0926
MPA Braun-
schweig,
UB III/B-08-016 (EI 120)

 *) Limitations through country-specific extrapolations are possible.